Filter
Top Products
Menu functions > 62
USB
MENU
This menu controls the operation of the printer’s USB data
interface.
N
ETWORK
MENU
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
ITEM SETTINGS EXPLANATION
SOFT RESET ENABLE /
DISABLE
Enables or disables the SOFT RESET
command.
SERIAL NUMBER ENABLE /
DISABLE
Sets the maximum USB I/F transfer
speed
SPEED 12 / 480 Mps Selects the interface speed
ITEM SETTINGS EXPLANATION
TCP/IP ENABLE /
DISABLE
Enables or disables this network
protocol.
NETBEUI ENABLE /
DISABLE
Enables or disables this network
protocol.
IP ADDRESS
SET
AUTO / MANUAL Specifies whether IP address allocation
is automatic (DHCP) or manually
assigned.
IP ADDRESS xxx.xxx.xxx.xxx Current assigned IP address. To
change, press ENTER and use
+/–
keys to increment 1st octet, then press
ENTER again to move on to next octet.
When 4th octet has been set, press
ENTER again to register new address.
SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. To
change, proceed as above.
GATEWAY
ADDRESS
xxx.xxx.xxx.xxx Current assigned gateway address. To
change, proceed as above.
FACTORY
DEFAULTS
EXECUTE Reloads the settings present when the
unit was setup by the manufacturer.
WEB ENABLE /
DISABLE
Enables or disables Web config. facility.