Filter
Top Products
Menu functions > 60
C
OLOUR
MENU
The printer automatically adjusts colour balance and density at
appropriate intervals, optimising the printed output for bright
white paper viewed in natural daylight conditions. The items on
this menu provide a means of changing the default settings for
special or particularly difficult print jobs. Settings revert to their
default values when the next print job is complete.
Y-DIMENSION 148-297-1200
MILLIMETRE
Selects the length of paper defined by
the “Custom” settings referred to in
the foregoing PAPER SIZE settings.
Note that media of up to 1200mm in
length can be fed from the multi
purpose tray for banner printing.
ITEM SETTINGS EXPLANATION
DENSITY CONTROL AUTO
MANUAL
If set to AUTO, image density will be
automatically adjusted at power on,
when a new image drum or toner
cartridge is installed, and at intervals
of 100, 300 and 500 drum counts. If a
500 drum count interval occurs during
a print job it will occur at the end of
that job, and will take up to 55
seconds. If set to manual, this
adjustment will only be performed
when initiated by the next menu item.
ADJUST DENSITY EXECUTE Selecting this will permit adjustment of
the colour density.
AJST
REGISTRATION
EXECUTE Performs automatic colour registration
adjustment. Normally this is done on
power on and when the top cover is
opened and then closed. This process
accurately aligns the cyan, magenta
and yellow images to the black image.
C REG FINE AJST
M REG FINE AJST
Y REG FINE AJST
-3~0~+3
-3~0~+3
-3~0~+3
Performs fine adjustment of image
timing in relation to the black image
component.
ITEM SETTINGS EXPLANATION