Filter
Top Products
1
The Cut Sheet Feeder (CSF) option can be mounted on
the front or the rear of the printer, but can only be
mounted on the rear if the optional Rear Push Tractor is
not installed.
The CSF stacker takes up to 100 sheets of 20-lb.
(75 g/m
2
) paper.
Front View
1 Rear Sheet Supports
2 Paper Guides
3 Paper Set Lever
4 Center Guides
5 Guide Roller
6 Hopper Roller
7 Stacker
Rear View
1 Lock Levers
2 Connecting Cable
Installation: Front Mount
1. Unpack the cut sheet feeder. Remove the shipping
materials.
2. Turn off the printer.
3.
Prepare the printer:
Open the gear cover (1) on the
printer until it is vertical, then let it slide down into the
housing. Slide the paper guide (2) as far to the right as
it will go.
4. Hold the CSF with the back facing you, and place the
U-shaped brackets (1) at either end on the shafts (2) at
either end of the printer sheet feed platform. Gently
lower the CSF into place.
F6_02.jpg
F6_03.jpg
Front F6_04.jpg
Front F6_05.jpg
English
Cut Sheet Feeder Installation Instructions
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Français. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Português . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16