Filter
Top Products
PAPER RECOMMENDATIONS > 35
TRANSPARENCIES AND ADHESIVE LABELS
The manufacturer of this printer recommends the following guidelines
when selecting transparencies and adhesive labels for use in your printer:
> Always use manual feed.
> Always use rear output.
> Media must be designed for use in laser printers or photocopiers
and must be able to withstand 200°C (390°F) for 0.1 sec.
> Do not use media designed for use in color laser printers and
photocopiers
> Labels should cover entire carrier sheet.
> Carrier sheet or adhesive must not be exposed to any part of the
printer.