Filter
Top Products
OPERATION > 62
further use until the print job is complete. This requires less disk
space on your computer, since there is no spool file.
5. Directs the spooler to check the document setup and match it to
the printer setup before sending the document to print. If a
mismatch is detected, the document is held in the print queue and
does not print until the printer setup is changed and the document
restarted from the print queue. Mismatched documents in the
queue will not prevent correctly matched documents from
printing.
6. Specifies that the spooler should favour documents which have
completed spooling when deciding which document to print next,
even if completed documents are lower priority than documents
which are still spooling. If no documents have completed
spooling, the spooler will choose larger spooling documents over
shorter ones. Use this option if you want to maximize printer
efficiency. When this option is disabled the spooler chooses
documents based only on their priority settings.
7. Specifies that the spooler should not delete documents after they
are completed. This allows documents to be re-submitted to the
printer from the spooler instead of printing again from the
application program. If you use this option frequently it will
require large amounts of disk space on your computer.
8. Specifies whether advanced features, such as pages per sheet, are
available, depending on your printer. For normal printing keep
this option enabled. If compatibility problems occur you can
disable the feature. However, these advanced options may then
not be available, even though the hardware might support them.
9. This button provides access to the same setup windows as when
printing from applications. Changes made via the Windows
Control Panel become the Windows default settings.