Filter
Top Products
Basic Operation
OPERATION GUIDE 3-7
Copying
Follow the steps as below for basic copying.
1
Press the Copy key when the
Copy key/indicator is off.
NOTE: If you place the original and press the Start key before the copier
has warmed up, only the scanning is performed in advance and the
copying job starts upon completion of the warm-up.
2
Place the originals on the
platen or in the optional
document processor.
NOTE: For loading instructions, refer to Loading Originals on page 2-25.
3
Check that [Auto] is selected of Paper Selection on the touch panel. Paper
that matches the size of the original will be selected automatically.
To change the paper
size, press [Paper
Selection] and
select desired paper
source.
NOTE: Select paper size manually, if necessary, instead of using
automatic paper selection.
Status 10/5/2006 10:10
Image
Quality
Ready to copy.
Set Original.
Original
Zoom
Paper
Copies
Copy Image
Org./Paper/
Finishing
Quick Setup Layout/Edit Advanced
Setup
1
Normal 0 A4
Zoom Density Paper
Selection
1-sided
>>1-sided
Text+Photo Collate
Duplex Original
Image
Collate/
Offset
Auto
Plain