Filter
Top Products
1.0 INTRODUCTION
The PCI-DAS1002 and PCI-DAS1001 are multifunction analog and digital I/O boards designed to operate in computers
with PCI bus accessory slots. The boards provide 16 single-ended/8 differential analog inputs with sample rates as high as
150 KHz. The boards also provide two analog output channels, 24-bits of parallel digital I/O and three counters. The only
difference between the boards are the analog input ranges. These are shown below.
PCI-DAS1002 Bipolar: +/- 10V, 5V, 2.5V and 1.25V
Unipolar: 0-10V, 0-5V, 0-2.5V and 0-1.25V
PCI-DAS1001 Bipolar: +/- 10V, 1.0V, 0.1V and 0.01V
Unipolar: 0-10V, 0-1.0V, 0-0.1V and 0-0.01V
The boards are fully plug-and-play, with no switches or jumpers to set. The boards are fully auto- and self-calibrating with
no potentiometers to adjust. All calibration is performed via software and on-board trim D/A converters.
The PCI-DAS1000 boards are fully supported by the powerful Universal Library software driver library as well as a wide
variety of application software packages including DAS Wizard and HP VEE.
1