Filter
Top Products
EN
7
ALARM
ALARM DISPLAY AND SOUND
This product has two types of daily alarm that can be set
to go off at the same time every day. You can choose to
be woken up by the radio or by a buzzer alarm. Press
ALARM at any time to toggle between the calendar and
the alarm display.
NOTE
If the radio alarm time is reached when the AC
adaptor is not connected the unit will default to buzzer alarm.
SET THE ALARM(S)
1. Press and hold ALARM for 2 seconds.
2. Use VOL
or to change the flashing setting.
3. Press ALARM to confirm the setting and move onto
the next one.
4. The settings appear in the following order: Hour,
minute, alarm type (i.e. radio alarm or buzzer alarm).
5. If radio alarm is selected, preset station and preset
volume can also be altered.
6. Press ALARM to exit alarm setting mode.
7. The daily alarm will be on automatically after setting.
ACTIVATE / DEACTIVATE THE ALARM(S)
• Press the ALARM ON / OFF to enable or disable the
daily alarm.
• When the buzzer alarm / radio alarm icon appears on
the display the alarm is activated. When the icons do
not appear the buzzer alarm / radio alarm is deactivated.
SNOOZE / TURNING THE ALARM OFF
When activated, the alarm icon flashes, the backlight
and projector turn on for 8 seconds. The buzzer alarm
sounds for 2 minutes if no key is pressed. The radio will
remain on for 120 minutes if no key is pressed.
To silence the alarm:
• Press SNOOZE / LIGHT to silence it for 8 minutes.
The buzzer alarm or radio alarm icon will flash to
show snooze is enabled.
OR
• Press any key except SNOOZE / LIGHT to mute the
alarm and activate it again in 24 hours.
PROJECTION UNIT
The projection unit can display both time and alarm
status. To use this feature:
RRM326P_EN_output 03/09/2005, 14:447