Filter
Top Products
1. Follow steps 1–3 on page 58.
2.
Rotate to select “YES”.
3. Press .
4. Press again.
5. Press .
MENU
SET
SET
JOG DIAL
Features Summary
59
#78
If you use an extension telephone
in the TEL/FAX mode, select the
desired number of rings to be
generated before the unit answers.
TEL/FAX RING
1, 2, 3, 4
#80
To reset the advanced features to
their default settings
SET DEFAULT
YES
NO
See pages 48 and 49 for details.
You can confirm the status of the
other party’s machine.
●
If the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.
●
The connecting tone volume
cannot be adjusted.
#76
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones; fax
tone, ring back tone and busy tone.
CONNECTING TONE
ON
OFF
#77
To change the receive mode in the
AUTO ANSWER setting
AUTO ANSWER
FAX ONLY
TEL/FAX
“FAX ONLY”: Facsimile only mode
(p. 45)
“TEL/FAX”: Telephone/Facsimile
mode (p. 48, 49)
●
If you select “TEL/FAX”, the unit
will print an information list.
Code Display & Feature Settings How the unit operates
(The default setting is in bold type.)
See page 51 for details.
#70
If you have a pager and wish to
know when your unit receives a
fax, activate this feature.
FAX PAGER CALL
ON
OFF
#49
To answer a call with an extension
telephone in the TEL/FAX mode
AUTO DISCONNECT
ON /
CODE= 0
OFF
See page 49 for details.
To program:
1. Follow steps 1–3 on page 58.
2. Rotate to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
MENU
SET
SET
JOG DIAL