Filter
Top Products
28
Before Starting
Touch Panel Display
1 2 3 4 5 9
10
2022 21
12
15
16
18
19
26
25
24
23
27
13
14
11
8
6 7
17
NOTE
● Use only gentle finger pressure to activate the Touch Panel Display. DO NOT USE SHARP
OBJECTS such as pens, fingernails etc., as this may damage the panel.
● Touch Panel Display Brightness Adjustment:
To adjust the brightness of the Touch Panel display, press and while holding down the "C"
(CLEAR) key, keep pressing the "ORIGINAL SIZE/LEDGER" or the "COPY SIZE/LEDGER"
keys until the desired brightness is achieved.
ORIGINAL SIZE/LEDGER : Dimmer
COPY SIZE/LEDGER : Brighter
Job Status Indicator
Ex.: Copying 3 sets.
The Indicator displays the progress of a job task as follows:
0/3 → 1/3 → 2/3 → 3/3
When the Department Counter function is set up, the departmental
Identification Code input screen is displayed on the Touch Panel
Display. A registered departmental Identification Code (4-digit) is
required to gain access to each secured function, or the secured
Copy/Fax/Scanner function(s) cannot be used. Please consult
with the key operator regarding the departmental Identification
Code(s) for the desired function.