Panasonic 8016P Copier User Manual


 
59
Function
00 NUMBER OF PRINTS Sets the default number of prints. 1
1-999
01 PAPER SIZE Sets the default paper size setting. LETTER
LETTER / INVOICE / FLS1 / FLS2 / A3 / B4 /
A4 / B5 / A5 / LEDGER / LEGAL
02 PAPER TRAY Sets the default Paper Tray selection. Auto
AUTO / BYPASS / TRAY-1 / TRAY-2 / TRAY-3 / TRAY-4
03 PRINT DIRECTION Sets the default print orientation setting. 1:PORTRAIT
1:PORTRAIT / 2:L-SCAPE
04 PRINT DATA Determines the provision of the print data.
PRESS SET TO PRINT
05 2-SIDED PRINT Selects whether the 2-Sided print setting is 1:OFF
enabled.
1:OFF / 2:ON
06 BIND POSITION Sets the default bind position. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
07 RESOLUTION Sets the default resolution setting. 2:600dpi
1:300dpi / 2:600dpi / 3:1200dpi
08 FONT (PCL)
1
Sets the default PCL font. 0
0-99
09 SYMBOL TABLE (PCL)
1
Sets the default PCL symbol table. 11
0-35
10 PITCH (PCL)
1
Sets the default PCL pitch. 10.00
0.44-99.99
11 POINT SIZE (PCL)
1
Sets the default PCL point size. 12.00
4.00-999.75
12 LINES/PAGE (PCL)
1
Sets the default PCL lines/page. 60
5-128
13 RETURN CHARACTER (PCL)
1
Sets the default PCL return character. 1:CR
1:CR / 2:CR+LF
14 MUTUAL A4/LETTER Selects whether the mutual size A4/LETTER is 1:OFF
enabled.
1:OFF / 2:ON
15 MAILBOX MEMORY
2
Indicates the mailbox memory status.
PRESS SET TO SELECT
19 KEY OPERATOR MODE Inputs the key operator password.
ENTER PASSWORD =
Printer Settings
No.
Modes Function
Initial
Setting
1Available only when the optional Printer Controller Module is installed.
2Available only when the optional Hard Disk Drive Unit is installed.
10 TONER SAVE (T/P) Selects the Toner Save Level to use for the 1:NONE
Text/Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
11 TONER SAVE (PHOTO) Selects the Toner Save Level to use for the 1:NONE
Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
12 SADF DEFAULT Selects whether the Job Build and SADF Mode 1:OFF
is enabled.
1:OFF / 2:ON
No.
Modes Function
Initial
Setting