Filter
Top Products
E-10
ENGLISH
Control Reference Guide
1.
AG-MSU10 connectors
Connectors for connecting the interface
box to the AG-MSU10 Mobile Storage
Unit.
2.
USB 2.0 connector (POWER connector)
Use the USB cable to connect this
connector to a USB 2.0 connector on a
personal computer to power the drive
from the computer.
3.
USB 2.0 connector (SIGNAL connector)
Use the USB cable to connect this
connector to a USB 2.0 connector on a
personal computer to power the drive
from the computer and to transfer data
between devices.
4.
WARNING LED
Lights to indicate that not enough power
is supplied.
For details, refer to “Checking Bus
Power Operation” (page E-13).
5.
POWER/ACCESS LED
Green: Power is supplied and the
device is ready to use.
Orange: The host is accessing the
device.
NOTE:
POWER/ACCESS LED operation
depends on the installed SSD.
6.
eSATA connector
Use the eSATA cable to connect this
•