Filter
Top Products
E-8
ENGLISH
Interface Box Setup
Installing an SSD (Solid State Drive)
Install an SSD into the interface box.
NOTE:
Do not install a hard disk drive in the interface box.
1
Remove the five screws in the interface box and remove
the top lid.
2
Slide the SSD into the box while taking care to align the
connectors on the SSD with those in the box.
NOTE:
Do not insert the SSD at an angle as the connectors
could be damaged.
•
•
Back side
Use a No. 0 Phillips screwdriver
to remove the screws.
Back side
Use a No. 0 Phillips screwdriver
to remove the screws.
SSD
Connectors
SSD
Connectors