Filter
Top Products
12
How to use the on-screen menus
Battery voltage display
Concerning the signal formats
The battery voltage information is displayed all the time
when ON has been selected as the BATTERY REMAIN
item setting on the OSD screen of the main menu.
It indicates the voltage level of the battery. If an Anton
Bauer digital battery is being used, its remaining level is
indicated as a number of “∫” blocks and as a percentage
along with the voltage value.
DC150V 80%
.
Image control display
The image control information is displayed when an image
has been adjusted using the image controls. (Refer to page
6)
It appears when a control has been pressed in so that it has
popped out or when an adjustment is made by turning an
already popped out control.
It is cleared when a control is pressed again and returned to
its original position. It is also cleared when a popped out
control is not touched for 10 seconds.
[CONTRAST] 50
Menu setting Signals whose input is accepted Status display
AUTO All supported signals The format of the input signals is displayed.
1080/50I 1080/50I 1080/50I
1080/25P 1080/25P 1080/25P
576/50I 576/50I
576/50I
480/60P 480/59.94P
480/60P
480/60I 480/59.94I
480/60I
NTSC NTSC
NTSC
PAL PAL
PAL
1080/60I
1080/60I
1080/59.94I 1080/59.94I
1080/60I
1035/60I
1035/60I
1035/59.94I 1035/59.94I
1035/60I
1080/30P
1080/30P
1080/29.97P 1080/29.97P
1080/30P
720/60P
720/60P
720/59.94P 720/59.94P
720/60P
720/60P ANAMO
720/60P
720/59.94P 720/59.94P
720/60P
1080/24P
1080/24P
1080/23.98P 1080/23.98P
1080/24P
1080/24PsF
1080/24psF
1080/23.98psF 1080/23.98PsF
1080/24PsF