Filter
Top Products
13
3
Select your application
You are able to start working on your computer.
NOTE
The power saving function is factory set, so if there is no input from a key, the
touch pad, or the external mouse for two minutes, the LCD is powered off (ECO
mode).
The LCD will resume operation when the touch pad or an external mouse (when
one is connected) is used or a key is pressed.
The power saving mode ([Power Scheme] in [Control Panel] - [Power Manage-
ment]) is factory set, so if there is no input from a key, the touch pad, or an
external mouse (when one is connected) for a certain interval of time, the power
to the LCD and hard disk is may be turned off (ECO mode). In addition, when
the computer is left alone, it automatically enters the suspend mode (
"Suspend/Hibernation Functions").
The LCD will resume operation when the touch pad or an external mouse (when
one is connected) is used or a key is pressed.
[System Devices] in [Start] - [Settings] - [Control Panel] - [System] - [Device
Manager] may contain a device or devices bearing an exclamation mark or ques-
tion mark. This does not indicate a malfunction. Such a mark (exclamation or
question mark) will not be displayed if the operating environment of the device
showing the mark is corrected, by for instance installing the driver of the device.
If security indicator ( ) is displayed,
you must first enter your User Password (
"Security Measures")
*
1
If you are starting from the suspend mode (
"Suspend / Hiber-
nation Functions"), if after three attempts the correct password is not in-
put, or if no password is entered for about a minute, the computer returns
to the suspend mode.
When an application or file that was previously displayed
appears on your screen,
the suspend or hibernation mode (
"Suspend / Hibernation Functions")
has been set.
Over three incorrect attempts,
If the correct password is input,
Will Start
Will Not Start*
1
(Power off)
Upon entering your User
Password and pressing
Enter
Windows 95
Windows 98