Panasonic CQ-RG131W Power Supply User Manual


 
CQ-RG131W
14
E
N
G
L
I
S
H
11
Fire Wall of Car
3 mm
φ
Hex. Nut
Rear Support Strap
Mounting Bolt
Mounting Collar
Tapping Screw
Rear Support Bracket
(existing on the car)
Rubber Cushion
(Option)
Mounting Bolt
Mounting Collar
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt
using a suitable wrench.
c) Insert the Power Connector
to the unit.
d) Insert the unit into Mounting Collar
and push it in until click is heard.
e) Secure the rear of the unit to the car by either of the two recommended methods as follows.
Using the Rear Support Strap
Affix one end of the Rear Support Strap
to the rear of the unit, and the other end to the Fire
Wall of Car, or some other metallic area.
Using the Rubber Cushion (Option)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt on the rear of the unit with Rubber Cushion (Option), and mount it into
the existing Rear Support Bracket.
Installation Procedures
Note: Disconnect the cable from the negative () battery terminal.
1. Secure the Mounting Collar
.
Insert Mounting Collar
into the
cars dashboard, and bend mounting
tabs out with a screwdriver.
Dashboard
Mounting Collar
Mounting Tab
Screwdriver
Unit
Power Connector
Unit
Mounting Bolt
3. After installation reconnect the negative () battery terminal.
Installation Guide
(continued)