Filter
Top Products
CQ-RG131W
4
E
N
G
L
I
S
H
1
Power and Sound Controls
CQ-RG131W
LOUD
Power
Turn the key in the ignition until the accessory indicator lights.
Press
[PWR] to switch on the power.
LO
U
D
Volume
●
Press [VOL
jj
] or [VOL
ii
] to increase or decrease volume.
0 to 39
Volume Level
●
Press [VOL
jj
] or [VOL
ii
] for more than 0.5 second to change
numeric levels on the display rapidly.
CQ-RG131W
LOUD
CQ-RG131W
LOUD
Mute
●
Press [MUTE] mute the sound completely.
●
“MUTE” blinks while this operation.
●
Press [MUTE] again to cancel.
Tone Enhancement
●
Press and hold [MUTE] (LOUD) for more than 2 seconds to
enhance bass and treble tones when listening at low or medium
volume.
●
Press and hold [MUTE] (LOUD) for more than 2 seconds again
to deactivate when listening at higher volumes.
Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic
volume level adjuster so that you will not be deafened with sudden loud volume.
This system operates as follows. When
[PWR] is switched on, the volume level is low. After that,
the volume level gradually returns to the level as the same as the one before turning off.
Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.
Press and hold