Filter
Top Products
12
Mode Functions
■■
■■
■ Toner Saver Mode
1) This only works when using copy mode. When printing out by Printer or Fax function, this
mode does not work.
2) This Toner Saver Mode is to save toner consumption by copying dark originals lighter.
The exposure indicator “LIGHTER” flashes when Toner Saver Mode is on.
3) To enter this mode: #Press COPY key.
$Press FUNCTION key.
%Press “4” key of Keypad
&Press SET key.
(Select “TONER SAVER 2:VALID”.
Press “2” key of Keypad
)Press SET key.
To cancel this mode: #Press COPY key.
$Press FUNCTION key.
%Press “4” key of Keypad
&Press SET key.
(
Select “TONER SAVER 1:INVALID”.
Press “1” key of Keypad
)Press SET key.
■■
■■
■ Auto Start Function
While the copier is warming up, you may position your original on the copier, enter your
copy job selections and press the Start key. The Wait indicator (Start key) will flash until the
warm up cycle is completed and the copy job will automatically start.
Note: Please enter your copy job, when “WARM UP, PLEASE WAIT SELECT COPY JOB”
appears in message display.
■■
■■
■ Energy Saver Mode/Sleep Mode
Energy Saver Mode
# To enter this mode
Press Energy Saver key. The indicator will flash.
Automatically enters after 15 minutes from the last copy.
$ To cancel this mode
Press Energy Saver key again.
Sleep Mode
#Automatically enters after 30 minutes from the last copy.
Power consumption will drop and the Energy Saver key indicator will light.
$To cancel this mode.
Press Energy Saver key.
If you wish to change the above settings or if you need more information, call your Panasonic
authorized dealer.
Power Consumption Warm Up Time
Normal Operation Approximately 60 Wh None
Energy Saver Mode Approximately 35 W 5 seconds
Sleep Mode Approximately 1.5 W 25 seconds