Filter
Top Products
32
Copies are marked
Is the copier platen glass or platen cover
dirty?
Clean the glass or platen cover.
(See page 33)
Is the corona dirty?
Need to clean corona. (See page 34)
Does “JAN-01-1999” appear on message
display?
Replace the Litium Battery,
refer to operating instructions (For Facsimile).
Is the back side of copies dirty?
Clean the roller. refer to operating
instructions (For Facsimile).
Does “INFO. CODE=###” message appear
on display?
Refer to the Information Codes of the
Operating Instructions (For Facsimile) on
page 89.
Checking
Check Action
Unit does not operate
Does the display light up?
Check if the Power Switch is turned on and
if the power plug is inserted into the outlet.
Is Energy Saver key flashing? Press Energy Saver key on control panel.
Does the Add Paper Indicator appear on
display? (J)
Add paper. (See page 23) or check if the
paper tray is closed completely.
When the 2nd paper feed module is not
installed, the paper size should be selected
“0: Not installed”. (See page 24)
Does the Paper Misfeed Indicator appear
on display? (I)
Remove misfed paper.
(See page 27-31)
Does “CLOSE RIGHT COVER” appear on
message display?
Right cover is open. Please close it.
Does “CLOSE ADF” appear on message
display?
Close ADF (Automatic Document Feeder)
Troubleshooting
Does any of the E#-## appear on display?
Turn copier power switch off, then back on.
If error code comes back again, call your
Panasonic authorized dealer.
Does U19 appear on message display?
Check if toner cartridge is installed
completely. (See page 25)
Does U40 appear on message display?
Add paper to the sheet bypass and press
Start.