Filter
Top Products
42
Chapter 2 SD Print Settings
Preset Jobs
Preset Job function simplifies setting procedures and improves operating efficiency.
Storing a Job in Memory
You can register the frequently used print settings to job buttons.
zUp to 10 preset jobs can be registered.
zOnce registered, the print job settings are kept in the job memory until they are overwritten by new settings.
zRefer to Recalling a Preset Job Stored in Memory (see page 44).
1
Press the Print key if the machine is
set to other function mode.
2
Select “SD Print”.
3
Insert the SD Memory Card or connect
the USB Flash Memory.
zFor details on how to insert the SD Memory
Card, refer to step 2 of Printing from SD
Memory Card (see page 11).
zFor details on how to connect the USB Flash
Memory, refer to step 3 of Printing from
USB Flash Memory (see page 14).
4
Select the print features (see pages 26
to 41).
5
Enter the desired number of prints.
6
Select “Preset Jobs”.
7
Select “Save”, and then select a job
button.
zJob name is displayed on the button in
which a job has been already registered.