Filter
Top Products
NETWORK
FEATURES
109
Network Features
Selective Reception
Your machine has a special feature, Selective Reception, which can prevent the receiving of unnecessary
documents (i.e. junk fax, direct mail, etc.).
Before receiving the document, the last 4 digits of the ID Number received from the sending machine will be
compared with the last 4 digits of the telephone number programmed in each One-Touch or Abbreviated station.
When a match is found, your machine will start receiving the document. If a match is not found, your machine will
cancel the reception and an Information Code 406 will be recorded on the Journal.
Setting the Selective Reception.
(see Note 1)
(see Note 2)
Make sure that the FAX lamp is ON. If not, press to select the "FAX MODE".
1
2
3
4
5
NOTE
1. When the Selective Reception is set, your machine can receive only from those stations which are programmed
in the built-in auto-dialer.
2. If your ID number has not been set, your machine might not be able to receive from some models.
To set your ID number, see page 18.
SET MODE (1-4)
ENTER NO. OR
∨
∧
FAX PARAMETER(1-99)
NO.=
❚
46 SELECT RCV
1:INVALID
46 SELECT RCV
2:VALID