Filter
Top Products
APPENDIX
APPENDIX
153
Direct Dialling The method of dialling where you enter the entire telephone number
through the keypad.
DTMF (Dual Tone Multi-
Frequency)
Dialling method that sends a different set of frequencies for each digit of
the telephone keypad. Commonly refers to touch tone dialling.
Duplex Scan The ability to scan both sides of 2-sided original(s) for transmission.
ECM (Error Correction Mode) The ability to correct transmission errors as detected during the
transmitting phone call.
End Receiving Station In a relay network, the final station designated to receive the document(s).
FAX Parameter List The list that contains the home Fax Parameter settings that you have
programmed into your machine.
F.C.C. Federal Communications Commission. The U.S. Government organization
that regulates communications originating or terminating in the United
States.
File A task that has been stored into the memory of your unit. Examples are
deferred transactions.
Fixed Print Reduction The method that allows you to determine one reduction rate, such as 75%,
for all incoming documents.
Function The control panel key that will be utilized to begin an operation or
configuration of a feature.
G3 Mode (Group 3) Refers to the standards and transmission capabilities of the current
generation of facsimile machines.
Group Dialling The ability to program many telephone numbers into a single station so
that many locations can be dialed in sequence utilizing a single keystroke.
Handshaking The exchange of a group of control signals that communicate between the
transmitter and receiver. These signals determine the condition at which
communication can occur.
Header A row of information that is transmitted by the sending machine and printed
on the top of each page by the receiving unit. This identifies the
transmitting unit and information about the transmission, such as time and
date.
ITU-T International Telecommunication Union - Telecommunication, formerly
known as C.C.I.T.T.
ITU-T Image No. 1 An industry standard original that allows comparisons of the transmission
speeds and capabilities of facsimile machines.
ID A programmable address of up to 20 digits identifying your machine.
Image Memory Capacity
This signifies the amount of memory available in your machine for storing
pages of documents. All page units of measure are based on the ITU-T
Image No.1.
Individual Transmission
Journal
A report that is printed by the transmitting unit stating information regarding
the last document transaction.
Industry Canada (D.O.C) Department of Communications. The Canadian Government organization
that regulates communications originating or terminating in Canada.
Glossary