Panasonic DW6300K Projector User Manual


 
S PEC F ILE
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
DLP
Projectors
As of February 2009 < 2 >
Main Unit
Power supply: North America:
Europe:
Power consumption: North America:
Europe:
DLP™ chip: Panel size:
Display method:
Pixels:
Lens: PT-DW6300S/DW6300K:
PT-DW6300LS/DW6300LK:
Lamp:
Screen size:
Brightness*
2
:
Center-to-corner uniformity*
2
:
Contrast*
2
:
Resolution:
Scanning frequency: DVI-D:
RGB:
YPBPR (YCBCR):
S-Video/Video:
Optical axis shift:
Keystone correction range:
Installation:
Terminals*
3
: DVI-D IN:
RGB 1 IN:
R, G, B:
Y, P
B, PR:
120 V AC, 50/60 Hz
220–240 V AC, 50/60 Hz
780 W (780 VA) (Standby mode eco*
1
: 0.2 W, Standby mode normal:
8 W. Both with fan stopped.)
750 W (840 VA) (Standby mode eco*
1
: 0.3 W, Standby mode normal:
9 W. Both with fan stopped.)
0.65˝ diagonal (16:10 aspect ratio)
DLP™ chip x 1, DLP™ system
1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels
Powered zoom/focus lenses (1.8–2.4:1), F 1.7– 2.0, f 25.6–33.8 mm
Optional poweredzoom/focus lenses
300 W UHM lamps (x 2) (dual lamp system)
50–600 inches (50–200 inches with the ET-DLE055), 16:10 aspect ratio
6,000 lumens (dual lamp, high power mode)
90%
2,000:1 (full on/full off, contrast mode: high, brightness: 3,000 lumens)
1,000:1 (full on/full off, contrast mode: normal)
1,280 x 800 pixels (Input signals that exceed this resolution will be
converted to 1,280 x 800 pixels.)
Horizontal: 15–91 kHz, Vertical: 50–85 Hz,Dot clock: 162 MHz or lower
Horizontal: 15–91 kHz, Vertical: 50–85 Hz,Dot clock: 150 MHz or lower
525i (480i): f
H 15.75 kHz; fV 60 Hz,
625i (576i): fH 15.63 kHz; fV 50 Hz,
525p (480p): fH 31.50 kHz; fV 60 Hz,
625p (576p): fH 31.25 kHz; fV 50 Hz,
750 (720)/60p: fH 45.00 kHz; fV 60 Hz,
750 (720)/50p: fH 37.50 kHz; fV 50 Hz,
1035/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,
1080/25p: fH 28.13 kHz; fV 25 Hz,
1080/24p: fH 27.00 kHz; fV 24 Hz
1080/24sF: fH 27.00 kHz; fV 48 Hz,
1080/30p: fH 33.75 kHz; fV 30 Hz
1080/60p: fH 67.50 kHz; fV 60 Hz,
1080/50p: f
H 56.25 kHz; fV 50 Hz
Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz,
(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Vertical: +60% (powered), horizontal: ±10% (powered)
Vertical: ±40° (±30° with the ET-DLE055)
Ceiling/floor, front/rear
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link
only
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)– WUXGA*
4
(1,920 x 1,200), compatible with non-
interlaced signals only, dot clock: 25–162 MHz
BNC x 5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative), 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR: 0.7 Vp-p, 75 ohms
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Specifications