Panasonic DW6300K Projector User Manual


 
S PEC F ILE
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
DLP
Projectors
As of February 2009 < 3 >
RGB 2 IN:
R, G, B:
Y, P
B, PR:
VIDEO IN:
S-VIDEO IN:
SERIAL IN:
SERIAL OUT:
REMOTE 1 IN:
REMOTE 1 OUT:
REMOTE 2 IN:
LAN:
Power cord length:
Cabinet materials:
Dimensions (W x H x D): PT-DW6300S/DW6300K:
PT-DW6300LS/DW6300LK:
Weight: PT-DW6300S/DW6300K:
PT-DW6300LS/DW6300LK:
Operating temperature:
Operating humidity:
Supplied Accessories
Optional Accessories
Zoom lens (1.4–2.0:1)
Zoom lens (2.4– 3.8:1)
Zoom lens (3.8–5.7:1)
Zoom lens (5.6–9.0:1)
Fixed-focus lens (0.8:1)
Ceiling mount bracket:
D-sub HD 15-pin x 1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative), 75 ohms
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), PB/PR: 0.7 Vp-p, 75 ohms
BNC x 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub 9-pin x 1 (RS-232C compliant) for external controller
D-sub 9-pin x 1 for link control
M3 jack x 1 for wired remote control
M3 jack x 1 for link control
D-sub 9-pin x 1 for external control (parallel)
RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant
with PJLink™
3.0 m (9´10˝)
Molded plastic
498 mm x 175 mm*
4
x440mm*
5
(19-19/32˝ x 6-7/8˝ *
4
x 17-5/16˝ *
5
)
(with supplied lens)
498 mm x 175 mm*
4
x 432 mm (19-19/32˝ x 6-7/8˝ *
4
x 17˝)
(without lens)
Approx. 16.0 kg (35.3 lbs)(with supplied lens)
Approx. 15.2 kg (33.5 lbs)(without lens)
0°–45°C (32°–113°F)
20%–80% (no condensation)
Power cord, Wireless/wired remote control unit, Batteries for remote
control (x 2), Wire rope
ET-DLE150
ET-DLE250
ET-DLE350
ET-DLE450
ET-DLE055
ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
*1 In Standby mode eco, LAN-based network functions such as the standby ON function will not operate.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 The HD/SYNC and VD inputs do not accept the tri-level sync signal.
*4 With legs at shortest position.
*5 Including the supplied lens.