Filter
Top Products
– EE26 –
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Aluminum Electrolytic Capacitor/HFQ
HFQ
A
Series:
Type :
-55 to + 105°C
6.3 to 63 V .DC
6.8 to 15000 µ F
±20 % (120Hz/+20°C)
After following life test with DC voltage and +105±2°C ripple current value applied. (The sum of
DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall
meet the limits specified below.
After storage for 1000 hours at +105±2°C with no voltage applied and then being stabilized at
+20°C, capacitor shall meet the limits specified in “Endurance”.
I < 0.01 CV or 3 (µ A) after 3 minutes
Add 0.02 per 1000µF for products of 1000µF or more
(max.)
(120Hz /+20°C)
Impedance at -10°C, 100kHz < 200 % of initial specified value at +20°C,100kHz.
(Impedance ratio at 100kHz)
Duration:1000 hours (φ4 to 8), 2000 hours (φ10 to 18) post test requirements at +20°C
(>6.3mmdia)
L
L<16:L+1.0max
φd±0.05
14 min
min
φD+0.5 max
φ10<
P±0.5
φD+0.5 max
φ8>
P±0.5
L>20:L+2.0max
Body Dia. φD
Body Length L
Lead Dia. φd
Lead space P
15to25 30 to 40
0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8
1.5 2 2.5 3.5 5 5 5 7.5 7.5
4 5 6.3 8 10 12.5 16 18
■ Frequency correction factor for ripple current
W.V.
(V.DC)
60 120 1k
10k
100k
Frequency(Hz)
0.55 0.65 0.85 0.90 1.0
6.3 to 63
Capacitance
(µF)
6.8 to 330
390 to 1000
1200 to 2200
2700 to 15000
0.75 0.80 0.90 0.95 1.0
0.80 0.85 0.95 1.00 1.0
0.70 0.75 0.90 0.95 1.0
E C A F Q
Discontinued
Radial lead type
■ Features Endurance :105°C 1000 to 2000h
Low impedance (1/3 to 1/4 of Series HFE)
■Specification
Operating Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance
DC leakage current
W.V. 6.3 10 16 25 35 50 63
tan δ 0.22 0.19 0.16 0.14 0.12 0.10 0.08
Characteristics at Low
Temperature
Shelf life
■ Explanation of Part Number
R.W.V. code
Capacitance code
■ Dimensions in mm (not to scale)
Safety vent
Vinyl sleeve
Dissipation Factor
Endurance
Capacitance change
D.F.
DC leakage current
±20% of the initial measured value
<200% of the initial specified value
< initial specified value
Product Code
Series Code
Option
Mar. 2005