Panasonic FZG1AADNB1M Personal Computer User Manual


  Open as PDF
of 52
 
29
Useful Information
2 Perform the “First-time Operation” (
è
page 19).
NOTE
l
Thedateandtime,andthetimezonemaynotbecorrect.Besuretosetthemcorrectly.
3 Perform Windows Update.
4 <Only for model with TPM> Clear TPM.
A
OntheStartscreen,ickfrombottomsidetoinsideofthescreenandtouch[Allapps]
onthetoolbar.
B
Touch[Run]under“WindowsSystem”,input[tpm.msc]andtouch[OK].
C
Touch[ClearTPM...]under“Actions”ontherightofthe“TPMManageronLocalCom-
puter”screen.
D
Touch[Restart]ofthe“ManagetheTPMsecurityhardware”screen.
Thecomputerwillrestart.
E
When“TPMcongurationchangewasrequestedto...”isdisplayed,press
F12
.
Windowswillstart.
F
When“TPMisready”appears,touch[Close].
1 Turn on the computer, and touch the top left corner of the screen sev-
eral times while [Panasonic] boot screen is displayed.
TheSetupUtilitystartsup.
l
Ifthe[Panasonic]bootscreenisnotdisplayed,turnonthecomputerwhiletouchingthe
topleftcornerofthescreen.
l
Ifthepasswordisrequested,entertheSupervisorPassword.
2 Write down all of the contents of the Setup Utility and touch [Exit] and
double-touch [Load Default Values]
.
Attheconrmationmessage,touch[Yes].
3 Touch [Exit] and double-touch [Save Values and Reboot].
Attheconrmationmessage,touch[Yes].
Computerwillrestart.
4 Touch the top left corner of the screen several times while [Panasonic]
boot screen is displayed.
TheSetupUtilitystartsup.
l
Ifthepasswordisrequested,entertheSupervisorPassword.
5
Select the [Exit] menu, then double-touch [Recovery Partition].
6 Touch [Reinstall Windows] and touch [Next].
TheLicenseAgreementscreenappears.
7 Touch [YES].
TheLicenseAgreementscreenappears.
8 Touch [Yes, I agree to the provisions above and wish to continue!] and
touch [Next].
9 Select the setting and touch [Next].
l
[ReinstallWindowstothewholeHardDisktofactorydefault.]
SelectthisoptionwhenyouwanttoinstallWindowstothefactorydefault.Afterinstal-
lation,youcancreateanewpartition.Forhowtocreateanewpartition,referto“To
changethepartitionstructure” (
è
page21).
CPE02725ZA_FZ-G1mk1_8_7_OI_E.indb 29 2013/02/07 10:31:19
 previous next