Panasonic KV-S6050W Scanner User Manual


 
33
Display Panel Instructions
¥ Other display explanations
Display Content
This will be displayed when scanning is started until it is
completed.
After completion, “Ready” will be displayed.
If the STOP key is pressed, scanning will stop. This will be
displayed when the STOP key is pressed during scanning.
Even if the STOP key is pressed in a setting mode, this will be
displayed. Then the scanner will return to setting mode after
stopping scanner operation.
This will be displayed when the STOP key is pressed and the
scanner stops.
Even if the document remains in the scanner, “JAM” will not be
displayed.
If the document remains in the scanner, open the ADF door
and the front door, then remove it.
Then “Ready” will be displayed.
This will be displayed after setting scanning to start with a host
computer.
If the document is set and the START key is pressed, scanning
will start.
This is displayed in the sleep mode.
To return from the sleep mode, press any key on the scanner
or issue the scan instruction from the application.
Scanning...
1
Stopping...Wait!
Scanner Stopped
123 456
Press START Key
Sleep