Filter
Top Products
56
Replacing Consumable Roller Modules
11
Pull the right side of the shaft in the
direction of arrow (1), and hold it
there.
Pull the retard roller module in the
direction of arrow (2), and then
remove it.
12
Take out the retard roller module in the
optional “Roller Exchange Kit
(KV-SS044)”.
For supplies and accessories:
Call 1-800-346-4768 (U.S.A. only) or
your dealer.
13
Pull the right side of the shaft in the
direction of arrow (1) and hold it
there.
Attach the new retard roller module as
shown in the direction of arrow (2).
Return the right side of the shaft as
shown in the direction of arrow (3).
•
Confirm if pin A and pin B are inserted in
their notches correctly.
• Attach the retard roller module so that the
notch A is on the left side.
1
2
Retard roller module
Shaft
Retard roller module
When the pin is not inserted in the notch properly,
it may cause double feeding or a paper jam.
Shaft
1
2
3
Notch A
Pin A
Pin B
Notch B