Filter
Top Products
57
Replacing Consumable Roller Modules
14
Close the conveyor by pushing it into
the unit.
•
When the conveyor is closed, the click-
stop mechanism will operate.
• If the conveyor is not closed correctly
and the operation in step 15 is done, the
conveyor may break.
15
Close the ADF door.
•
Push both sides of the ADF door down
gently until it clicks into place.
• Since the roller are located on the left
side of the ADF door, there is more
weight on the left side.
Therefore, it is important to note that the
door needs to have tension evenly
divided to close it properly.
• After replacing roller modules, clear the
“Replace Roll. Warning” display.
(Refer to page 31.)
Conveyor
Before closing the ADF door, confirm
that the conveyor is closed correctly.
If it is not, the conveyor may break.
Conveyor