Filter
Top Products
17
VQT4X90
≥ When the microSD card is removed, a notification sound rings, and the access lamp flashes fast.
(a state in which a microSD card is not inserted)
≥ Do not touch the terminals on the back of the microSD card.
≥ Do not apply strong shocks, bend, or drop the microSD card.
≥ Electrical noise, static electricity or the failure of this unit or the microSD card may damage or
erase the data stored on the microSD card.
≥ Do not expose the terminals of the microSD card to water, dirt or dust.
≥ Do not place microSD cards in the following areas:
jIn direct sunlight
jIn very dusty or humid areas
jNear a heater
jLocations susceptible to significant difference in temperature (condensation can occur.)
jWhere static electricity or electromagnetic waves occur
≥ About disposing of or giving away the microSD card.
(Refer to the Operating Instructions (PDF format))
∫ About the access lamp
≥ When the access lamp is lit, do not:
jRemove the microSD card
jTurn this unit off
jInsert and remove the USB cable
jExpose this unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/microSD card or this
unit.
Press the power button to turn on this unit.
When using a microSD card not from Panasonic, or one previously used on other equipment, for
the first time on this unit, format the microSD card. When the microSD card is formatted, all of
the recorded data is deleted. Once the data is deleted, it cannot be restored.
Turn this unit on/off
The power lamp is turned on.
To turn off this unit
Hold down the power button until the power
lamp goes off.
Proceed to “Connecting directly with a
smartphone” (l 19) and “Setting up
with Setup Wizard” (l 21) to finish the
setup of this unit.
You can enjoy the functions of this unit
after finishing the setup.
HX-A100_VQT4X90_mst.book 17 ページ ２０１３年１月２２日 火曜日 午後８時８分