Filter
Top Products
■ Operation
Attention for capacitive touch screen
(1) Do not touch it by finger nail, because capacitive touch screen can not recognize it. Touch
it by finger tip.
(2) Do not touch it during startup. It initializes touch screen during startup. If it is touched
during startup, touch screen is not initialized correctly.
(3) Be careful to not accidentally touch around display edges or press on display bezel as it
can negatively affect display touch sensor accuracy.
(4) Touch screen calibration can be affected by atmospheric change - typically great in
magnititude. In case of calibration shifted, perform a calibration adjustment.
(5) Adequacy of touch screen reaction-time or sensitivity may vary by operator. Display
sensitivity can be adjusted by executing a display sensitivity adjustment program*.
(6) Capacitive touch-screen panel uses radio frequency to detect finger tip touch. Terminals
are configured to use different frequencies to avoid conflict in the event of two or more
terminals operating within 1.5 meters (approx. 5') of each other. In the event of conflict
('ghost' or inexplicable touch-screen reaction(s)), shutdown and reboot the terminal to
reselect touch screen frequency.
* Inquire to the supplier about the executing display sensitivity adjustment program.
Carrying/moving terminals
Do not lift or carry the terminal by holding the Display Unit/Unit. Lift and carry the terminal by
securely holding the Main Body Unit from the bottom, with two hands.
Display angle adjustment
Take care not to place the fingers between Display and Main Unit when the angle of Display is
adjusted. Injury may occur. Adjust Display tilt-angle with two hands placed on outside, bezel
edges of Display unit.
26