Filter
Top Products
Component Identification
15
∫ Power turn-on sequence
1
Turn on the power of the scanner.
≥ Press the power switch.
(The LED will now light.)
2
Turn on the power of the host
computer after scanner’s LED lights
green
.
∫ About LED
LED indicates the status of the scanner as follows:
*1: The rollers need to be cleaned or replaced.
See which warning occurs with User Utility.
LED light Status
Green Ready to scan or scanning
Green (flashing) Sleep mode
Orange Ready to scan or scanning with warning *1
Orange (flashing) Initializing
Sleeping with warning *1
Red An error occurred
LED