Panasonic KV-S2045C Scanner User Manual


 
32
How to re-attach the sensor rollers
If the sensor rollers are removed, re-attach them.
Re-attach the sensor roller for back scanning to the ADF door
Attach the shorter sensor roller to the ADF
door by placing the non-gear side to the ADF
door release.
Match the groove to the guide.
Push the roller, and confirm the sensor is locked
by the springs on both sides.
Re-attach the sensor roller for front scanning
Attach the longer roller to the unit by placing
the non-gear side to the ADF door release.
Match the groove to the guide.
Attach the side of the ADF door release first, and
attach the other side.
Confirm both new rollers move slightly.
Press down on the sensor rollers and rotate them.