Filter
Top Products
43
Receiving Faxes
SET
Display
ON
SPEED DIRECTOR
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for voice calls and a separate telephone line for faxes.
FAX ONLY mode!
(all calls are received as faxes)
1
Set feature #77 to “FAX ONLY” (p. 59).
2
If the AUTO ANSWER light is off, turn it on
by pressing .
●
The display will show the number of rings
before the unit answers a call in FAX ONLY
mode.
Display:
Example:
3
If you wish to change the ring count setting,
rotate until the desired
number is displayed, and press .
●
When receiving calls, the unit will
automatically answer all calls and only
receive fax documents.
SET
SPEED DIRECTOR
AFTER 3 RINGS
PICKUP & RCV FAX
AUTO ANSWER
Line 1 – Voice calls
Line 2 – Fax calls
Only a fax machine is connected.
Activating FAX ONLY mode
Note:
●
If the AUTO ANSWER light is already on and you wish to change the ring count, turn it off once then on
again by pressing and follow the instructions in step 3.
●
This mode should not be used with a telephone line which is used for both voice and fax calls. Fax
communication will be attempted even if someone is trying to call you.
AUTO ANSWER