Filter
Top Products
38
Receiving Faxes
1
When the unit rings, lift the handset to
answer the call.
2
When:
—document reception is required,
—a fax calling tone (slow beep) is heard, or
—no sound is heard,
press .
3
Replace the handset.
●
The unit will start fax reception.
CONNECTING.....
FAX/START
Display
STOP
FAX/START
AUTO ANSWER
To stop receiving
Press .
Friendly reception feature
When you answer a call and hear a fax calling
tone (slow beep), the unit will automatically start
fax reception.
●
If this feature is not required, set feature #46 to
off (p. 54).
STOP
TEL mode!
(answering all calls manually)
If the arrow (▼) is shown on the right of the
display, turn it off by pressing .
Display:
ON
TEL MODE
AUTO ANSWER
Note:
●
If you do not answer the call within 10 rings,
the unit will temporarily switch to the fax and
the caller can send a document.
●
Up to 30 sheets of printed paper can be held.
Remove the printed paper before it exceeds
30 sheets.
Fax reception in memory
When a printing problem is detected, the unit will
temporarily store the received document into
memory.
While the document is in memory:
—the display will show an error message and the
following message alternately,
Display:
—slow beeps will sound if feature #44 is set to on
(p. 54).
●
Follow the instructions on pages 57 and 58 to
solve the problem.
●
For memory capacity, see page 73.
FAX IN MEMORY
Activating TEL mode
Receiving a fax manually