Filter
Top Products
3. Help
21
Detailed operating instructions are on the CD-ROM.
“RX Memory Full” L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper or remove the jammed paper.
L If feature #442 is set to “Always”,
– check the connection between the computer and the unit.
– check the computer is turned ON.
L If feature #448 is set to “On”,
– view, print or save the received fax documents, and then erase the
unnecessary documents.
– turn the setting to “Off”. The fax documents stored in memory will be
printed automatically.
– set feature #449 to “On”, and then print the received fax documents.
“Same name already
exists.”
L The same file name already exists in the SD card folder. See the other
displayed message instructions to continue saving the data.
“Scanner Position Error” L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“SD Card is pulled out” L The SD card has been removed from the unit. Reinsert it.
“SD Card not installed.” L There is no SD card inserted in the unit. Insert one.
“SD Card Write
Protection”
L The write-protect switch of the SD card is in the lock position. Unlock the
switch to allow write access.
“SD Size Over” L There is no space to save new data on the SD card. Erase unnecessary
data.
“Self Calibration” L The unit is changing the colour calibration. Wait for a while.
“Transmit Error” L A transmission error occurred. Try again.
“Toner Cartridge Not
Installed”
L The toner cartridge is not installed. Install it.
“Tray #2 Left Cover
Open”
L The left cover of the optional input tray is open. Close it.
“Waste Toner Not
Installed”
“Waste Toner Cartridge
Not Installed”
L The waste toner cartridge is not installed. Install it.
Display Cause & Solution
MC6040_6260CX-PNQW1377ZA-QRG-en.book Page 21 Wednesday, July 30, 2008 10:24 AM