Filter
Top Products
Important Information
7
Detailed operating instructions are on the CD-ROM.
Laser radiation
Fuser unit
Note:
L The area near the recording paper exit also gets
warm. This is normal.
Toner cartridge
Be careful of the following when you handle the toner
cartridge:
USB cable
Important safety instructions
When using this unit, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, or personal injury.
1. Do not use this unit near water, for example near a
bathtub, wash bowl, kitchen sink, etc.
2. For users other than Australia:
During thunderstorms, avoid using telephones
except cordless types. There may be a remote risk of
an electric shock from lightning.
For Australian users:
During thunderstorms, avoid using telephones
including cordless phones. There is a risk of an
electric shock from lightning.
3. Do not use this unit to report a gas leak, when in the
vicinity of the leak.
SAVE THESE INSTRUCTIONS
CLASS 1 LASER PRODUCT
The printer of this unit utilises a laser. Use of
controls or adjustments or performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
See the operating instructions for the Laser
diodes properties.
During or immediately after printing, the
fuser unit gets hot. This is normal. Do not
touch the fuser unit.
If you ingest any toner, drink several glasses
of water to dilute your stomach contents,
and seek immediate medical treatment.
If any toner comes into contact with your
eyes, flush them thoroughly with water, and
seek medical treatment.
If any toner comes into contact with your
skin or clothing, wash the area thoroughly
with cold water, then air dry. Do not use hot
water or hair dryer. If there is skin irritation,
seek immediate medical treatment.
If you inhale any toner, move to an area with
fresh air and consult local medical
personnel.
Use only shielded USB cable (Example: Hi-
Speed USB 2.0 certified cable).
MC6040_6260CX-PNQW1377ZA-QRG-en.book Page 7 Wednesday, July 30, 2008 10:24 AM