14
Sending faxes
1Open the document cover, and adjust the width of the
document guides to the size of the document.
2Insert the document (1 page only) FACE DOWN until
a single beep is heard.
3If necessary, press repeatedly to select the
desired resolution (see below).
●
Select within 10 seconds, while is
displayed.
Document
guide
Document cover
Only one page can be set at a time.
FACE DOWN
4Dial the fax number.
5Press (Fax).
●
The unit will start fax transmission.
●
After scanning a page, 2 short beeps will sound,
and will be displayed for about 4
seconds. To send more than 2 pages, set the next
page during the above display.
Document
guide
Document cover
FACE DOWN
Only one page can be set at a time.
Sending a fax manually Sending a fax using automatic
dialing
1Insert the document (1 page only) FACE DOWN until
a single beep is heard.
To select the resolution
Select the desired resolution according to the type of document, by pressing .
(Standard) for printed or typewritten originals with normal-sized characters.
(Fine) for originals with minute printing.
(Photo) for originals containing photographs.
2Press the desired one-touch dial button ( to ).
●
The unit will start fax transmission.
Using the one-touch dial
Using the phonebook
1Insert the document (1 page only) FACE DOWN until
a single beep is heard.
3Press (Search button) repeatedly until the
desired name is displayed.
2Press (Phonebook).
4Press (Fax).
●
The unit will start fax transmission.