Filter
Top Products
Hand Scanner Functions (For KX-PW21CL only)
Preparations
1
Scanning documents
2
1. Remove the hand scanner from the main unit
and open the battery cover.
1. Remove the hand scanner from the main unit.
2. Select the resolution. ( text, photo)
3. Select the scanning width.
4. Set the hand scanner on the document.
5. Press (start/stop).
6. Move the hand scanner slowly
over the document.
Left side of
the document
Scanner
position
2. Install the battery (included).
3. Connect the hand scanner to the main unit.
9
Power Indicator
Power Indicator
Flashes (Red)
Lights (Red)
Lights (Green)
Flashes slowly
(Green)
Does not light.
Does not light.
The battery power is low.
Replace the battery.
Replace the battery.
Memory is empty.
The battery power is full.
Memory Indicator
Memory Indicator
7. Press (start/stop) to end the operation.
8. Connect the hand scanner to the main unit.
– A beep is heard.
– The in use indicator light turns on (green).
66% of memory is used.
99% of memory is used.
Memory is full.
Flashes (Green)
Red
Black
(Scanning Width)
(Resolution)
Max. 1.5 m
Max. 252 mm
Scanning
direction
Battery cover
In Use Indicator
Memory Indicator
(Start/Copy)