Filter
Top Products
14
Operating the hand scanner
1Press down the handle of the hand scanner, and pull
out the scanner from the main unit. Then, turn over
the scanner to start scanning.
2Press (Resolution) repeatedly to select the
desired resolution.
●
(Standard)
●
(Fine)
●
(Photo)
3Press (Select) repeatedly to select the scanning
width.
●
A4: within 208 mm
●
B4: within 252 mm
4Place the scanning position on the upper left side of
the document.
5Press (Start).
●
When you hear a beep, you can start scanning.
Scanning a document
Scanning
position
6Press the hand scanner against the document, and
move it slowly toward the direction of the arrow.
7After scanning is completed, press (Stop).
●
You will hear a beep, and the scanned document is
stored in memory of the main unit. Only 1 page can
be scanned.
8To print the scanned document or to send it by fax,
see the next page.
●
If you make a mistake, press (Stop) to erase
the content of the memory, then start from step 2.
Scanning
direction
Important:
●
When you have completed scanning, the scanned
document in memory will be automatically erased after
10 minutes.
●
To reinsert the hand scanner into the main unit, turn the
scanner over, and insert it into the main unit firmly.
●
When the hand scanner is out of the main unit, you
cannot make a copy or send a fax.