8
Automatic dialing on the main unit
1Press (Store).
●
“XX” shows the remaining
station numbers you can
store.
●
You can program up to 99
stations, including the pre-
programmed items.
1Rotate the (Search dial) until the desired name
is displayed.
2Enter the name, up to 12 characters (see the table on
page 7 for instructions).
3Press (Store).
2Lift the handset or press (Speakerphone).
4Enter the telephone number, up to 30 digits.
●
To correct a mistake, press (Clear).
5Press (Store).
●
To store a second or third number, repeat steps
4–5.
6Press (Store).
7If necessary, enter the group number (1–4).
Storing names and telephone
numbers in the search dial
Making a voice call using the
search dial
8Press (Store).
●
To program other items, repeat steps 2–8.
9Press (Stop) to exit the program.
Editing a stored name or number
1Rotate the (Search dial) until the desired name
is displayed.
2Press (Edit).
3Press .
●
If you do not need to edit the name, skip to step 5.
4Edit the name (see the table on page 7 for
instructions).
5Press (Store).
●
If you do not need to edit the telephone number,
skip to step 7.
6Enter the correct telephone number.
7Press (Store).
●
If you want to edit the second or third telephone
number, repeat steps 6–7.
8Press (Store) repeatedly until the following is
displayed.
●
If you do not need to
change the group number,
skip to step 10.
Example :
9If necessary, enter the correct group number.
10Press (Store).