Filter
Top Products
10
Automatic dialing on the main unit
Storing names and telephone
numbers in the phonebook
Making a voice call using the
phonebook
1Press (Phonebook).
1Press (Phonebook).
2Press (Set/Register).
●
“XXX” shows the remaining
station numbers you can
store.
●
You can program up to 150
stations, including 4 pre-
programmed stations.
3Enter the name, up to 20 characters (see the table on
page 9 for instructions).
4Press (Set/Register) twice.
5Enter the telephone number, up to 24 digits.
●
To correct a mistake, press (Clear).
8Press (Set/Register).
●
To program other items, repeat steps 3 to 8.
9Press (Stop) to exit the program.
2Press (Search button) repeatedly until the
desired name is displayed.
3Lift the handset or press (Speakerphone).
Editing a stored name or number
in the phonebook
3Press (Edit).
4Edit the name (see the table on page 9 for
instructions).
●
If you do not need to edit the name, skip to step 5.
5Press (Set/Register).
8Edit the telephone number.
●
If you do not need to edit the telephone number,
skip to step 9.
9Press (Set/Register).
1Press (Phonebook).
2Press (Search button) repeatedly until the
desired name is displayed.
6Press (Set/Register).
7If necessary, enter the group number (1-9).
6Edit the kana.
●
If you do not need to edit the kana, skip to step 7.
7Press (Set/Register).
10If necessary, enter the correct group number.
11Press (Set/Register).
12Press (Stop) to exit the program.