Filter
Top Products
11
Automatic dialing on the main unit
Storing names and telephone
numbers in the phonebook
Making a voice call using the
phonebook
1 Press (Phonebook).
2 Press (Set).
O
“XXX” shows the remaining
station numbers you can
store.
O
You can program up to
150 stations, including
4 pre-programmed stations.
3 Enter the name, up to 12 characters (see the table on
page 9 for instructions).
4 Press (Set).
5 Enter the telephone number, up to 24 digits.
O
To correct a mistake, press
(Flash/Clear/Erase).
6 Press (Set).
7 Enter the group number ( to ).
2 Press (Search button) repeatedly until the
desired name is displayed.
3 Lift the handset.
Editing a stored name or number
in the phonebook
3 Press (Character input mode/Edit/Intercom).
4 Edit the name (see the table on page 9 for
instructions).
O
If you do not need to edit the name, skip to step 5.
5 Press (Set).
6 Edit the telephone number.
O
If you do not need to edit the telephone number,
skip to step 7.
8 Edit the group number.
O
If you do not need to edit the group number,
skip to step 9.
1 Press (Phonebook).
2 Press (Search button) repeatedly until the
desired name is displayed.
1 Press (Phonebook).
8 Press (Set).
O
To program other items, repeat steps 3 to 8.
9 Press (Stop) to exit the program.
10
Press (Stop).
9 Press (Set).
7 Press (Set).