Filter
Top Products
44
Installations and connections
Installing the ink film
1 Open the control panel.
2 Open the back cover.
O
When the unit runs out of ink film, the following message will be displayed.
Install a new ink film.
Replacement ink film:
KX-FAN190 (15 m) 714
KX-FAN190W (15 m X 2) 1,208
4 If the ink film is slack, tighten it by
winding this gear (
orange)
.
3 Insert the ink film.
Insert the orange
gear
into the left slot
of the main unit.
Insert the white gear into the right slot
of the main unit.
5 Close the back cover pressing
“ ” down on both sides
until it clicks into place.
6 Close the control panel.
As of February 2007. Tax included.