Filter
Top Products
27
System Programming
7
[A] [BB] [CC] [D]
1
9
9
7
[A]
0
[A] [B]
1
6
Door Opener Assignment
Description
Assigns each extension to have access to door opener or not.
Input Format
Explanation
• [A]= 1 through 6 (corresponding to extension no. 21 through 26)
• [B]= 0: DISABLE/ 1: ENABLE
Default All extensions– 1: ENABLE
Day/Night Switching Mode
Description
Assigns automatic or manual day/night mode.
Condition
• If automatic switching mode is assigned, day/night mode is switched at the time
programmed in “#71 Day/Night Starting Time”.
Input Format
Explanation
• [A]= 0: Manual/ 1: Automatic
Default 0: Manual
Day/Night Starting Time
Description
Sets the starting time when automatic day/night mode is programmed in the “#70 Day/
Night Switching Mode” program.
Input Format
Explanation
• [A]= 1: Day start time / 2: Night start time • [BB]= Hour: 01-12
• [CC]=Minute: 00-59 • [D]=0: AM / 1: PM
Default Day– 9:00 AM Night–5:30 PM
System Data Clear
Description
Allows the system to re-initialize the system-programmed data. The features mentioned in
“Station Feature Clear” are also re-initialized. See page 11 of the User Manual. When all
the programmed data is cleared, the system will restart with the default setting.
Input Format