Panasonic KX-T206E Switch User Manual


 
29
System Programming
Hookswitch Flash Time Range
Assignment
Sets the hookswitch flash time range.
Input Format: #65 [A]
• [A]=1: 80–1000ms / 2: 80–150ms
3: 50–150ms (default)
Door Opener Access Time
Assigns the length of the Door Opener time.
The door is unlocked for the assigned time.
Input Format: #67 [A]
• [A]= 1: 1 sec/ 2: 2 sec/ 3: 3 sec/ 4: 4 sec/
5: 5 sec (default) / 6: 6 sec/ 7: 7 sec /
8: 8 sec
Other Programs (continued)
DISA Ringing Time Assignment
Sets the time to forward a call sent by the DISA
feature to other extensions. If the call is not
answered by the designated extension within the
programmed time, the call is forwarded to
extensions which are not assigned as “DIS-
ABLE” in the #04/#74 CO1 Ringing Assignment
(Day/Night) and #05/#75 CO2 Ringing Assign-
ment (Day/Night). If “DISABLE” is selected in
this program, the telephone at the designated
extension rings for 60 seconds and the call is not
forwarded.
Input Format: #60 [A]
• [A]=0: DISABLE / 1: 10 SEC/
2: 20 SEC (default)/ 3: 35 SEC
Toll Restriction Code Check
Assigns whether “ ” or “#” is to be checked or
not when a user dials them in the Toll Restriction
code.
Input Format: #62 [A]
• [A]=0: DISABLE/ 1: ENABLE (default)
CO Indicator Assignment
Assigns whether an incoming CO call indicates
or not on the CO button. Also it allows an
extension user to answer the call by pressing the
CO button when “DISABLE” is selected in the
#04/#74 “CO1 Ringing Assignment” or the #05/
#75 “CO2 Ringing Assignment” program.
Input Format: #63 [A]
• [A]=0: DISABLE (The indicator lights red and
a user cannot answer the
call.)
1: ENABLE (The indicator is flashing and
a user can answer the call.)
(default)
Note
You cannot check the assignments of the programs, #60, #62, #63, #65 and #67 by setting the
MEMORY switch to “PROGRAM”, and entering “#” and the program address.