Filter
Top Products
Preparation
About Your Projector
ENGLISH - 13
J Back and bottom view
NOTE:
• Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause damage or injury.
• When a cable is connected to the VARIABLE AUDIO OUT, the built-in speaker will be disabled.
MAIN POWER
Switch the projector on/off.
(page 21)
ARF (Auto Rolling Filter)
compartment
(page 40)
Lamp unit compartment
(page 41)
Font leg adjusters
Screw up/down to adjust the
projection angle. (page 15)
Security lock
Attach the commercial shackle lock,
manufactured by Kensington, to
protect your projector. Compatible
with the Kensington MicroSaver
Security System.
COMPUTER AUDIO IN
Connect audio cables for inputting
audio signals corresponding to
COMPUTER1 IN and/or
COMPUTER2 IN/1 OUT.
Air exhaust port
Heated air comes out of this
opening.
VARIABLE AUDIO OUT
Connect an audio cables for
outputting audio signals to the
connected equipment.
S-VIDEO IN
Connect a S-VIDEO signal cable.
VIDEO IN
Connect an RCA composite video
cable.
SERIAL
See “Serial terminal” on page 45.
REMOTE
See “REMOTE terminal” on
page 47.
COMPUTER1 IN
Connect an RGB signal cable from
a computer.
COMPUTER2 IN/1 OUT
Connect an RGB signal cable from
a computer.
Selectable for input
and output by menu operation.
AUDIO IN
Connect audio cables for inputting
audio signal corresponding to
VIDEO IN, S-VIDEO IN and
COMPONENT IN.
LAN
Connect a LAN cable for network
connection.
COMPONENT IN
Connect a YP
BPR signal cable.
Burglar hook port
Attach a commercial burglar
prevention cable.
AC IN
Connect the Power cord to supply
electronic power to the projector.
(page 20)