Filter
Top Products
36
Sending Faxes
Note:
●
If you program the wrong entry, press {
after step 4 to erase the entry.
●
Confirm the stored entries by printing a
broadcast programming list (p. 80).
Broadcast transmission!
This feature is useful for sending the same document to selected parties (up to 20 entries).
First program the entries, then see page 39 for transmission.
●
The broadcast function utilizes stations 1–3. The one-touch dial function will be canceled.
●
a key 1 and 2 can accept one-touch dial and navigator entries.
HI key can also accept manual dialing entries.
Programming entries into the broadcast memory
Station keys
SET
MENU
LOWER
MANUAL BROAD BROADCAST
STOP
Using the dial keypad (only for
MANUAL BROAD):
Enter the fax number and press w.
Example:
!
●
To program other entries, repeat
this step (up to 20 entries).
5
Press w after programming all of
the desired entries.
!
/
●
To program another broadcast key,
repeat steps 2 to 5.
6
Press { to exit the program.
DIRECTORY SET
PRESS NAVI.[
IH]
DIRECTORY SET
PRESS STATION OR
REGISTERED
DIR=3456789 [01]
NAVI.[+@-]@&@SET
DIR=3456789
1
Press p repeatedly until the following
is displayed.
Display:
/
2
For BROADCAST 1–2:
Press the desired a key.
Example:
Press + or - to select “BROADCAST”.
Example:
For MANUAL BROADCAST:
Press HI.
Press + or - to select “MANUAL BROAD”.
3
Press w.
4
Program entries.
Using stations 1–6:
Press the desired station key.
Example:
Using stations 7–12:
Press o, then press the desired
station key.
Using navigator directory:
Press + or - until the desired entry is
displayed and press w.
DIR=ANN [01]
NAVI.[+@-]@&@SET
DIR= [00]
NAVI.[+@-]@&@SET
STATION 3
MANUAL BROAD [±]
STATION 3
DIAL MODE [±]
STATION 1
BROADCAST [±]
STATION 1
DIAL MODE [±]
DIRECTORY SET
PRESS NAVI.[
IH]
DIRECTORY SET
PRESS STATION OR
KX-FLB756 (036-039) 03.4.14 9:12 PM Page 36