Filter
Top Products
ENGLISH-15
Preparation
14-ENGLISH
#
$
%
&
'()
*
+
P
C
POWER
LIGHT
INPUT
ENTER
MENU
FREEZE
NORMAL
ASPECT
USER
MEMORY
PICTURE
MODE
LCD PROJECTOR
V
I
D
E
O
C
M
P
N
T
COMPONENT
KEYSTONE
*
'
(
&
0
1
)
/
,
-
.
+
Projector control panel
Remote control unit
#TEMP indicator (page 44)
This indicator illuminates if an abnormally high temperature is detected
inside the projector. If the temperature rises above a certain level, the
power supply will be turned off automatically and the indicator will flash.
$LAMP indicator (page 45)
This indicator illuminates when it is time to replace the lamp unit. It flashes
if a circuit abnormality is detected.
%Power indicator (pages 22, 24 and 25)
This indicator illuminates red when the main power is switched on (standby
mode), and it illuminates green when projection of an image begins.
&POWER button (pages 22 and 24)
'MENU button (page 32)
This button is used to display the
“
MAIN MENU
”
. When a menu screen is
being displayed, it can be used to return to a previous screen or to clear the
screen.
(Arrow (
FF
,
GG
,
II
and
HH
) buttons (page 34)
These buttons are used to select and adjust items in the on-screen menus.
)ENTER button (page 34)
This button is used to accept and to activate items selected in the
on-screen menus.
*INPUT select button (page 23)
These buttons are used to switch the input signals from the connected
equipment.
+KEYSTONE button (page 26)
This button is used to correct keystone distortion of the projected image
when the projector position is tilted upward or downward.
,NORMAL button (page 35)
This button is used to reset the projector adjustment values to the factory
default settings.
-ASPECT button (page 28)
This button is used for aspect adjustment (vertical and horizontal
proportions).
.LIGHT button (page 30)
This button is used to illuminate the buttons on the remote control unit.
/FREEZE button (page 30)
This button is used to momentarily freeze projection so that a still picture is
displayed.
0PICTURE MODE button (page 27)
This button is used to display the “PICTURE MODE” menu.
1USER MEMORY button (page 31)
This button is used to display the “MEMORY LOAD” menu.