Filter
Top Products
21
Example of connecting with PCs
Caution
• When the projector's main power is turned OFF, also turn OFF all the PCs connected to it.
• *1 An asterisk denotes that the second projector requires positioning if the RGB outputs are connected in a
daisy chain. However, the signals should be divided at the signal source if possible.
Note
• If your PC is not equipped with a USB port, a ET-RMRC1 interface will be needed to use the mouse capability
of the remote control.
• For the specifications of the RGB signals that can be applied from the PC, see the data sheet on page 48.
• If your PC has the resume feature, the computer may not function properly until the resume capability is
disabled.
• Signals applied to the RGB1 or RGB2 ports appear at the RGB OUT port.
REMOTERGB OUT
OUT
WIRED
IN
IN
OUTIN
R/R-Y/P
R
G/Y SYNC/HD VDB/B-Y/P
B
IN OUT
OUTIN RL
USB SERIALS-VIDEO IN AUDIO IN
RGB
AUDIO
AUDIO
VIDEO
RGB 2 IN
OUTIN
DVI-D
RGB 1 IN
> PC < TBMU152
REMOTERGB OUT
OUT
WIRED
IN
IN
OUTIN
R/R-Y/P
R
G/Y SYNC/HD VDB/B-Y/P
B
IN OUT
OUTIN RL
USB SERIALS-VIDEO IN AUDIO IN
RGB
AUDIO
AUDIO
VIDEO
RGB 2 IN
OUTIN
DVI-D
RGB 1 IN
> PC < TBMU152
Color monitor with
RGB video ports
PC with
DVI port
PC with
USB port
PC Control PC
USB cable
(Accessory)
DVI Cable (Option)
(ET-SCDV03)
*1